[c-nsp] pickup group members wanna see calling ID

[Brad Henshaw]

In addition to (or possibly instead of) the pickup group you may be able to setup overlay-dn for each line on each of the users' phones. e.g. on User A's phone, add the config line:

ephone 1
 button 1o71,72,73,74,75

substituting ephone-dn tags as appropriate of course.

This will effectively turn each of the indial numbers into a shared line on the relevant phones. I can't remember whether in this instance the calling-number is shown on the display of phones with the overlay-dn, but it might be worth a try.

Regards,
Brad

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net on behalf of gokhan senol
Sent: Mon 12/25/2006 7:19 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] pickup group members wanna see calling ID
 
Hi,
my DID  range 5700-5799

2851 ccme.  i cretae pickup group, for 
userA5771-
UserB5772-
UserC5773-
User D 5774-
User E 5775

outside caller (from pstn) calls userA ..and the others can pick up the call when userA doesnt answer the call. But The other users can not see calling number, they only hear userA s phone ringing and then they press gruop pickup and * .
they wanna see the calling number before pick up the call.

is it possible in callmanger express?

The users have their own DID number, i can not creat hunt group number so outside caller dial hunt group number,, it is not an option..

any idea?
thans a lot

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/