[c-nsp] WS-X6148A-GE-TX Etherchannel limit

[Robert Hass]

On Mon, 18 Dec 2006, Tim Stevenson wrote:

>>Is this 1Gb/s is full-duplex (1Gb for inbound and 1Gb for outbound) or
>>half-duplex (inbound + outbound) ?
>
>Full duplex (1G in & 1G out simultaneously).

According to Cisco documentation WS-X6148-GE-TX card have 8 ports per
one ASIC. So, why 'show interface capa mod 3' shows that all ports are
using only two ASICs (1st - 1-24, 2nd - 25-48) ? Here is output from my
6500:

dc1-sw2# sh int capabilities module 3
GigabitEthernet3/1
  Dot1x:                 yes
  Model:                 WS-X6148-GE-TX
  Type:                  10/100/1000BaseT
  Speed:                 10,100,1000,auto
  Duplex:                half,full
  Trunk encap. type:     802.1Q
  Trunk mode:            on,off,desirable,nonegotiate
  Channel:               yes
  Broadcast suppression: none
  Flowcontrol:           rx-(off,on,desired),tx-(off,on,desired)
  Membership:            static
  Fast Start:            yes
  QOS scheduling:        rx-(1q2t), tx-(1p2q2t)
  CoS rewrite:           yes
  ToS rewrite:           yes
  Inline power:          no
  SPAN:                  source/destination
  UDLD                   yes
  Link Debounce:         yes
  Link Debounce Time:    no
  Ports on ASIC:         1-24
  Port-Security:         yes
[...]
GigabitEthernet3/33
[...]
  Ports on ASIC:         25-48
  Port-Security:         yes

Robert