[c-nsp] Etherchannel

[Eusebio López]

I have formed it thus, but it does not do load-balancing. The single traffic goes by a way 

	-----Mensaje original----- 
	De: Tassos Chatzithomaoglou [mailto:achatz at forthnet.gr] 
	Enviado el: jue 28/12/2006 13:12 
	Para: Eusebio López 
	CC: cisco-nsp at puck.nether.net 
	Asunto: Re: [c-nsp] Etherchannel
	
	

	I guess you could try the following: 

	2950 
	---- 
	int x/x 
	channel-group x mode on 

	3500XL 
	------ 
	int x/x 
	port group x 


	Just make sure you have all ports shut before assigning them to groups. 

	-- 
	Tassos 

	Eusebio Lo'pez wrote on 28/12/2006 1:49 μμ: 
	> I have formed Etherchannel configuration between two Catalyst 2950 and work perfectly. The problem is that I want to use a C3524XL with ios c3500xl-c3h2s-mz.120-5.WC9.bin and I do not find command channel-group. I will be able to use the command port group?

	> 
	> Cheers 
	> 
	> _______________________________________________ 
	> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
	> https://puck.nether.net/mailman/listinfo/cisco-nsp 
	> archive at http://puck.nether.net/pipermail/cisco-nsp/ 
	>