[c-nsp] subrate DS3 - can the remaining T1s be reused?

[Jerimiah Cole]

Justin M. Streiner wrote:
> As long as the muxes feed a C-bit framed DS3 to the router, you should be 
> OK on that end.  Clocking can an issue as well, but using one mux on each 
> end instead of two can help keep things manageable.

Since it's a mux, wouldn't it use an m13 framed ds3?

The subrate feature works by padding "unused" frames.  To make it work, 
you'd have to guarantee that the "used" frames were associated with the 
timeslots that are cross connected between the routers.  That seems like 
a stretch, but I haven't tried it.

Jerimiah
Tularosa Communications