[c-nsp] 2650XM does not recognized NW-ESW-16

[David Prall]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

Per the Data Sheet
http://www.cisco.com/en/US/products/hw/routers/ps259/products_data_sheet09186a00801aca3e.html

"Cisco Etherswitch Modules are supported in IP Plus or above in Cisco IOS releases 12.2T. Beginning with Cisco IOS 12.3 Mainline and 12.3T, the Cisco Etherswitch modules are supported in IP Base or above."

Since your running IP and not IP Plus it isn't recognized.

David

- --
David C Prall dcp at dcptech.com http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Min Qiu
> Sent: Wednesday, February 01, 2006 3:31 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 2650XM does not recognized NW-ESW-16
> 
> Hi,
> 
> My 2650XM is running c2600-i-mz.122-8.T5.bin.  It does not 
> recognized the added NW-ESW-16:
> 
> Slot 1:
>         Unknown (type 681) Port adapter
>         Port adapter is disabled
>         Port adapter insertion time unknown
>         EEPROM contents at hardware discovery:
>         Hardware Revision        : 1.0
>         Top Assy. Part Number    : 800-15156-01
>         Board Revision           : E0
>         Deviation Number         : 0-0
>         Fab Version              : 03
>         PCB Serial Number        : FOC08451YNK
>         RMA Test History         : 00
>         RMA Number               : 0-0-0-0
>         RMA History              : 00
>         Unknown Field (type 00CF): 00 11 93 FC 73 7E
>         MAC Address block size   : 17
>         EEPROM format version 4
>         EEPROM contents (hex):
>           0x00: 04 FF 40 02 A9 41 01 00 C0 46 03 20 00 3B 34 01
>           0x10: 42 45 30 80 00 00 00 00 02 03 C1 8B 46 4F 43 30
>           0x20: 38 34 35 31 59 4E 4B 03 00 81 00 00 00 00 04 00
>           0x30: CF 06 00 11 93 FC 73 7E 43 00 11 FF FF FF FF FF
>           0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
>           0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
> 
> Did I got a wrong network module?
> 
> Thanks,
> 
> Min
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 

-----BEGIN PGP SIGNATURE-----
Version: PGP Desktop 9.0.4 (Build 4042)

iQEVAwUBQ+EejYYwPzEDHVgLAQiYhwf/XNmgln1hIwCECIqrJbkeBznub85yKc20
+lZIxLn2iMRFU0gZIw4DsLW02JtCyr9lQ/ak0d/9Tb/0oW5TTrzt0Q6L8MtxZQUD
homCsf7+6h6hauoHS3eD/YnHCmd4JoQM/8MTL9LdKwEa/xYxzbNBe8u6yKzzU1Is
oXpciGQucZhXK5HBh60MVmQOqIWR/plCDUEcQuyCFMFMxXED113+x0EQgs+LE+w5
v566IuS/ZPhKAqKBS0F7sme5/yAcYWtepz33YGVHOvFTMgoXtUoeze7SBc9va3p5
Ap14ONBjpKh+vMazrIpvJatILfTq26CH+blNadRqpCVMV4asrHDHoA==
=eG/B
-----END PGP SIGNATURE-----