[c-nsp] 6500er FAN

Ahmad Cheikh Moussa acm at netuse.de
Fri Feb 3 01:37:18 EST 2006


Justin M. Streiner wrote:
> On Thu, 2 Feb 2006, Gert Doering wrote:
>>On Thu, Feb 02, 2006 at 10:06:51AM +0100, Ahmad Cheikh Moussa wrote:
>>>I have 6500 Catalyst and one FAN is out of order.
>>That's the big FAN board that slides in at the left of the chassis.
>>Usually one of the 9 or 12 fans on the board is stuck, and not turning
>>anymore.  You can hotplug the FAN module, and replace them all in one go.
> The individual fans are not replaceable.  Usually when one fan goes, the 
> others aren't too far behind, so it's not a bad idea to replace the entire 
> tray.  It beats having an outage because of the supervisor going into 
> thermal shutdown mode :-)
Thanks all for your reply.
I will look at this and give you an update.


Ahmad Cheikh-Moussa
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/

More information about the cisco-nsp mailing list