[c-nsp] SNMP Fabric 6500?

[Tim Stevenson]

You can SNMP poll each fabric channel for both 
ingress and egress. (ingress is from the linecard 
into the fabric, egress is from the fabric out to 
the linecard). Note that the CLI numbers the 
fabric channels 0 and 1 but with SNMP, fabric 
channels are numbered 1 and 2 prior to 
12.2(18)SXE. In 12.2(18)SXE and later, the 
channel ID numbering was brought in line with CLI.


The SNMP OIDs are from the CISCO-CAT6K-CROSSBAR-MIB:
Input fabric channel utilization: 
1.3.6.1.4.1.9.9.217.1.3.1.1.6.<mod#>.<channel#>
Output fabric channel utilization: 
1.3.6.1.4.1.9.9.217.1.3.1.1.7.<mod#>.<channel#>

C:\>snmpwalk -v2c -c obscurity tstevens-6506 1.3.6.1.4.1.9.9.217.1.3.1.1.6
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.1.0 = INTEGER: 22
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.2.0 = INTEGER: 4
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.3.0 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.3.1 = INTEGER: 11
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.4.0 = INTEGER: 0
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.4.1 = INTEGER: 10
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.6.6.0 = INTEGER: 0

C:\>snmpwalk -v2c -c obscurity tstevens-6506 1.3.6.1.4.1.9.9.217.1.3.1.1.7
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.7.1.0 = INTEGER: 23
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.7.2.0 = INTEGER: 9
SNMPv2-SMI::enterprises.9.9.217.1.3.1.1.7.3.0 = INTEGER: 1
<
>


Hope that helps,
Tim

At 10:58 AM 2/4/2006, Brian W. Gemberling submitted:
>Does anyone know if there is a MIB for polling fabric utilization per
>slot from a 6500?  I'd like to be able to poll/graph each slot if possible.
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.