[c-nsp] inbound ACl

[Alban Dani]

Hi there,

I have heard anecdotaly that in the Cisco 6500 running native IOS you can
run a command that will imitate
an "allow" statement on an ACL applied inbound on an interface for the ip
address assigned to that interface.

ie if you have Vlan 21 and the  ip address 1.2.1.1 255.255.255.0 then by
running this command you would implicitly
create something that would substitute "access-list 199 permit ip  1.2.1.0
0.0.0.255 any".

I hope I am making sense.

thanks

Alban