[c-nsp] snmp trap host strange problem

[Eric Kagan]

I removed 2 of the 3 snmp servers I originally had listed as SNMP trap
receivers.  When I issue a show SNMP, it still lists all 3. Has anyone seen
this behavior ?  IOS ver and config clips below.

Thanks
Eric
 
 
c72core1-wma uptime is 25 weeks, 2 days, 3 hours, 41 minutes
System returned to ROM by power-on
System restarted at 19:36:51 edt Wed Aug 17 2005
System image file is "slot0:c7200-p-mz.122-25.S5.bin"
 
Cisco 7206VXR (NPE400) processor (revision A) with 491520K/32768K bytes of
memory.
 
c72core1-wma#show run | beg snmp-server
snmp-server community comm RO 12
snmp-server trap-source FastEthernet0/0
snmp-server packetsize 2048
snmp-server enable traps snmp authentication linkdown linkup coldstart
warmstart
snmp-server enable traps isdn call-information
snmp-server enable traps isdn layer2
snmp-server enable traps channel
snmp-server enable traps sonet
snmp-server enable traps hsrp
snmp-server enable traps config
snmp-server enable traps entity
snmp-server enable traps envmon
snmp-server enable traps bgp
snmp-server enable traps rsvp
snmp-server enable traps frame-relay
snmp-server enable traps rtr
snmp-server enable traps dial
snmp-server enable traps voice poor-qov
snmp-server host 10.10.64.102 axstech

 
c72core1-wma#show snmp
Chassis: 16073475
934501 SNMP packets input
    0 Bad SNMP version errors
    69 Unknown community name
    0 Illegal operation for community name supplied
    0 Encoding errors
    4499280 Number of requested variables
    0 Number of altered variables
    857901 Get-request PDUs
    76531 Get-next PDUs
    0 Set-request PDUs
938164 SNMP packets output
    0 Too big errors (Maximum packet size 2048)
    177 No such name errors
    0 Bad values errors
    0 General errors
    934432 Response PDUs
    3732 Trap PDUs
 
SNMP logging: enabled
 
    Logging to 10.10.64.101.162, 0/10, 1195 sent, 1 dropped.
    Logging to 10.10.64.103.162, 0/10, 1195 sent, 1 dropped.
    Logging to 10.10.64.102.162, 0/10, 144 sent, 0 dropped.