[c-nsp] MIB for Dot1.Q sub interface

[Robert E.Seastrom]

snmpwalk should tell you about the ifindexes of all your
subinterfaces...  or am i misunderstanding the question?

                                        ---rob

"A. Rahman Isnaini R Sutan" <risnaini at indo.net.id> writes:

> Hi,
>
>
> I'm trying to get MIB from a 3660 cisco router with 12.2 T IOS Version 
> running on, from mrtg BOX.
> It works for getting ISL subinterfaces MIB, but not Dot1.Q sub interfaces.
>
> Any suggestion would be appreaciated.
>
> ^ Salam
> ^ A Rahman Isnaini R Sutan
>  
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/