[c-nsp] MIB for Dot1.Q sub interface

[A. Rahman Isnaini R Sutan]

Correct Robert,
Unfortunately snmpwalk gave me only interface 4/0 (for example).
Not my 4/0.1 and 4/0.2

Thanks anyway.

^ Salam
^ A Rahman Isnaini R Sutan



----- Original Message ----- 
From: "Robert E.Seastrom" <rs at seastrom.com>
To: "A. Rahman Isnaini R Sutan" <risnaini at indo.net.id>
Cc: <cisco-nsp at puck.nether.net>
Sent: Monday, February 13, 2006 7:07 PM
Subject: Re: [c-nsp] MIB for Dot1.Q sub interface


>
> snmpwalk should tell you about the ifindexes of all your
> subinterfaces...  or am i misunderstanding the question?
>
>                                        ---rob
>
> "A. Rahman Isnaini R Sutan" <risnaini at indo.net.id> writes:
>
>> Hi,
>>
>>
>> I'm trying to get MIB from a 3660 cisco router with 12.2 T IOS Version
>> running on, from mrtg BOX.
>> It works for getting ISL subinterfaces MIB, but not Dot1.Q sub 
>> interfaces.
>>
>> Any suggestion would be appreaciated.
>>
>> ^ Salam
>> ^ A Rahman Isnaini R Sutan
>>
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>