[c-nsp] 7600: eompls on Vlan ?

[Önder Ergün (Probil-İstanbul)]

I couldn't get it. Can you please explain your solution in detail? 



-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Colin Whittaker
Sent: Wednesday, February 15, 2006 2:54 AM
To: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] 7600: eompls on Vlan ?

> >Thanks, if thats the case, you should at the very least offer an 
> >option for doing this in software with reduced performance as a 
> >result, if not, I don't see a use for this architecture moving 
> >forward with our current EOMPLS plans.
> 
> The solution is if you need L2 switching is to utilize 
> FlexWAN/OSMs/SIPs for the uplinks (it done in software or microcode on 
> the card).

Another option although expensive is to get a 6748-GE card and patch the top row of ports to the bottom. 
access switchports on one row and EoMPLS ports on the other.
This will support 24 Vlan to EoMPLS tunnels per slot.

Colin
-- 
Colin Whittaker						+353 (0)86 8211 965
http://colin.netech.ie				   colin@(magnet|netech).ie
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/