[c-nsp] 7600: eompls on Vlan ?

Gert Doering gert at greenie.muc.de
Wed Feb 15 16:32:25 EST 2006


Hi,

On Wed, Feb 15, 2006 at 07:47:01PM +0000, Colin Whittaker wrote:
> > Someone said that EoMPLS on *Subinterfaces* would work, just SVIs won't.
> > 
> > If that's correct, a single loopback plug "VLAN trunk to router port
> > with subinterfaces" would do.
> 
> Not on a 7600 because vlans are consumed globably. 

Good point.

Generally speaking, what will the box do if you configure "gige 3/1.123" 
as a router port subinterface, with "encaps dot1q 123", and already have 
vlan 123 used elsewhere?  Will it refuse the command, or put the router
port into the same VLAN?

gert
-- 
USENET is *not* the non-clickable part of WWW!
                                                           //www.muc.de/~gert/
Gert Doering - Munich, Germany                             gert at greenie.muc.de
fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de


More information about the cisco-nsp mailing list