[c-nsp] 7600: eompls on Vlan ?

[Ian Cox]

At 10:32 PM 2/15/2006 +0100, Gert Doering wrote:
>Hi,
>
>On Wed, Feb 15, 2006 at 07:47:01PM +0000, Colin Whittaker wrote:
> > > Someone said that EoMPLS on *Subinterfaces* would work, just SVIs won't.
> > >
> > > If that's correct, a single loopback plug "VLAN trunk to router port
> > > with subinterfaces" would do.
> >
> > Not on a 7600 because vlans are consumed globably.
>
>Good point.
>
>Generally speaking, what will the box do if you configure "gige 3/1.123"
>as a router port subinterface, with "encaps dot1q 123", and already have
>vlan 123 used elsewhere?  Will it refuse the command, or put the router
>port into the same VLAN?

It will refuse the command. The only modules that have vlan local 
significance today, are the OSM-2+4-GEWAN, and the 7600-SIP-400 with 
GE SPA, and Enhanced FlexWAN with the fast ethernet PA.


Ian


>gert
>--
>USENET is *not* the non-clickable part of WWW!
> 
>//www.muc.de/~gert/
>Gert Doering - Munich, Germany                             gert at greenie.muc.de
>fax: +49-89-35655025                        gert at net.informatik.tu-muenchen.de
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/