[c-nsp] Using AUX port as 1 port terminal server

kevin gannon kevin at gannons.net
Tue Feb 21 13:49:05 EST 2006


Jee
I do this all the time the config on the aux is:

line aux 0
transport input all
no exec

You just need a normal rolled cisco cable then
between the two routers.

Regards
Kevin

On 2/21/06, Jee Kay <jeekay at gmail.com> wrote:
>
> I currently have a situation where I frequently put a pair of routers
> onto remote sites. Cost constraints prevent me installing a full set
> of terminal servers onto the same location, although I am currently
> investigating the small 1/2 port offerings from various companies.
>
> My question is: is it possible to 'cross-connect' the AUX port on one
> router to the CON port on the other router and somehow connect out of
> Router1's AUX into Router2's CON?
>
> Thanks,
> Ras
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


More information about the cisco-nsp mailing list