[c-nsp] Using AUX port as 1 port terminal server

[David Prall]

Yes this can be done. Used it to connect aux on router to console of switch.
Normal rollover cable. I believe the proper port is 2001.

David

--
David C Prall dcp at dcptech.com http://dcp.dcptech.com
  

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net 
> [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jee Kay
> Sent: Tuesday, February 21, 2006 1:28 PM
> To: c-nsp
> Subject: [c-nsp] Using AUX port as 1 port terminal server
> 
> I currently have a situation where I frequently put a pair of routers
> onto remote sites. Cost constraints prevent me installing a full set
> of terminal servers onto the same location, although I am currently
> investigating the small 1/2 port offerings from various companies.
> 
> My question is: is it possible to 'cross-connect' the AUX port on one
> router to the CON port on the other router and somehow connect out of
> Router1's AUX into Router2's CON?
> 
> Thanks,
> Ras
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>