[c-nsp] Bad Flash?

[Samuel Petreski]

try "show disk0:" or "format disk0:"

--Samuel

On Thu, 2006-02-23 at 20:15 -0500, David Coulson wrote:
> I moved a working 16mb linear flash card from an old 3640 into a 7206 w/ 
>   IO-FE today, and it flat out refused to do anything with it. I can't 
> even format it. I know that a card which is formated for a 3600 won't be 
> read on a 7200, but why can't I even reformat it on the 7200?
> 
> 16384K bytes of Flash PCMCIA card at slot 0 (Sector size 128K).
> 125824K bytes of ATA PCMCIA card at slot 1 (Sector size 512 bytes).
> 4096K bytes of Flash internal SIMM (Sector size 256K).
> Configuration register is 0x102
> 
> core-ar2#show slot0:
> Open device slot0 failed (Bad device info block)
> core-ar2#format slot0
> Format operation may take a while. Continue? [confirm]
> Format operation will destroy all data in "slot0:".  Continue? [confirm]
> Enter volume ID (up to 64 chars)[default slot0]:
> 
> %Error formatting slot0 (Bad sector not allowed in region)
> 
> David
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>