[c-nsp] TRUNK, MPLS and MTU

[Gautam]

Hi

If it is a trunk port, then it should accomdate 1 label and as an
access-port, 2 labels. But would suggest using the entire jumbo
size(1546/9000).

Regds


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net]On Behalf Of Palis Michael
Sent: Monday, January 09, 2006 5:38 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] TRUNK, MPLS and MTU


Hello all





 We have an MPLS enable network and I have a question regarding trunk-switch
interfaces. We set MTU size on all switch interfaces to 1526 in order to
accommodate MPLS packets. Do we need to increase MTU above 1526 on switch
trunk interfaces?





Thank you







_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

********** DISCLAIMER **********
Information contained and transmitted by this E-MAIL is proprietary to 
Sify Limited and is intended for use only by the individual or entity to 
which it is addressed, and may contain information that is privileged, 
confidential or exempt from disclosure under applicable law. If this is a 
forwarded message, the content of this E-MAIL may not have been sent with 
the authority of the Company. If you are not the intended recipient, an 
agent of the intended recipient or a  person responsible for delivering the 
information to the named recipient,  you are notified that any use, 
distribution, transmission, printing, copying or dissemination of this 
information in any way or in any manner is strictly prohibited. If you have 
received this communication in error, please delete this mail & notify us 
immediately at admin at sifycorp.com

www.sify.com - your homepage on the internet for news, sports, finance,
astrology, movies, entertainment, food, languages etc