[c-nsp] PPTP CLIENT ON ROUTER CISCO

[Oliver Boehmer (oboehmer)]

Eusebio López <> wrote on Monday, January 09, 2006 4:10 PM:

> hi,
> 
> I need to create a connection client pptp in router Cisco 827.
> 
> if I use a client pptp in my PC, it works correctly.  I want that It
> work for all the network when igniting router.
> 
> the configuration of my router is:
> 
> vpdn-group prueba
> ! Default L2TP VPDN group
> ! Default PPTP VPDN group
>  accept-dialin
>   protocol any
>   virtual-template 1
>  local name tunnel_vpn
>  no l2tp tunnel authentication
> 
> interface Virtual-Template1
>  no ip address
>  no ip redirects
>  no ip proxy-arp
>  ip nat inside
>  no ip route-cache
>  no peer default ip address
>  keepalive 4
>  ppp authentication chap
>  ppp multilink
> 
> somebody has some configuration of example?

you are likely missing IP address and pool configuration on your virtual-template. Please check out http://www.cisco.com/warp/public/471/pptp-ios.html for sample config..

	oli