[c-nsp] VLAN tagging

Jeff Kell jeff-kell at utc.edu
Wed Jan 11 14:25:05 EST 2006


Brian Desmond wrote:
> On an access port vlan tagging doesn't occur...
>  
>  
> If you want to convert a trunk port to an access port, the command on cat is 
>  
> set trunk 3/1 off
> set vlan 2 3/1

'clear trunk 3/1' turns off trunking
'set vlan 2 3/1' sets the vlan for an access port, or the default vlan for a trunk port

Jeff



More information about the cisco-nsp mailing list