[c-nsp] C3560 EtherChannel load balancing

[Asbjorn Hojmark - Lists]

> I believe 3560 should use src-dst IP load balancing by 
> default when IP routing is enabled.

I don't think the default depends on the routing part. I'm pretty
sure the default is always src-mac.

> interface config:
> 	channel-protocol pagp
> 	channel-group 1 mode on

There really isn't any point in setting pagp mode, when one is
running 'nailed up' channels (mode on). Also, it looks like the
general recommendation is changing from PAgP to LACP, when you
do run dynamic channels.

-A