[c-nsp] 76k DS3 interface alternative

[Bruce Robertson]

No experience with that product in particular, but another way to go
(and cheaper) is to get a couple of Adtran T3SUs from eBay, and add the
Ethernet bridge card.  If you're lucky you can find the bridge cards on
eBay, but we've always had to order them new.  Expect to pay around $500
for the bridge card new.  Here's the part numbers you want:

Adtran T3SU Quad Ethernet Bridge Module: 1200655L1
Adtran T3SU CSU/DSU: either 1202217L1 (newer) or 1200217L1 (older, but
works fine)

Bruce Robertson, President/CEO                           +1-775-348-7299
Great Basin Internet Services, Inc.    company-wide fax: +1-775-348-9412
http://www.greatbasin.net                       my efax: +1-775-201-1553



Jon Lewis wrote:

>Has anyone had any experience with the Allied Telesyn AT-TN1000?  I'm 
>wondering if pairs of these plugged into WS-X6348-RJ-45 FE ports at at 
>least one end would be a reliable cost saving way of terminating DS3's on 
>6500/7600's.
>
>----------------------------------------------------------------------
>  Jon Lewis                   |  I route
>  Senior Network Engineer     |  therefore you are
>  Atlantic Net                |
>_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>
>
>
>
>  
>