[c-nsp] OT: HPOV's Autodiscovery doesn't work through the PIX Firewall

Joseph Jackson jjackson at aninetworks.com
Sun Jan 15 01:13:03 EST 2006


Never worked with that ware but I would set syslog and monitor it too see if
any msg's are generated durning the discovery.

 -----Original Message-----
From: 	William Chu [mailto:william_w_chu at hotmail.com]
Sent:	Sat Jan 14 10:54:53 2006
To:	cisco-nsp at puck.nether.net
Subject:	[c-nsp] OT: HPOV's Autodiscovery doesn't work through the
PIX Firewall

Hi:

My customer has an HP Openview (HPOV) management
station sitting behind a PIX firewall (on the inside
interface). He launched the HPOV autodiscovery process
to discover the network topology and everything worked
fine except that the discovery died at the PIX.
Because of that, he couldn't discover the WAN network
on the outside interface of the PIX. However, if he
defined the WAN devices manually on the HPOV they
worked (SNMP-wise). I am not familiar with HPOV's
autodiscovery process so I wonder if anyone in this
forum has run into a similar issue before and what was
the tweaks on the PIX to allow HPOV autodiscovery to
work through it.

Thanks very much.

William


_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


More information about the cisco-nsp mailing list