[c-nsp] Netflow - 6509

Rubens Kuhl Jr. rubensk at gmail.com
Sun Jan 15 11:02:14 EST 2006


Sup2/MSFC2 can do Netflow themselves, no extra hardware needed, but
you need to enable NetFlow collection on the Sup2 also, not only the
MSFC2.

A suggested config for this I saved from a list:

mls aging long 64
mls aging normal 32
mls flow ip interface-full
mls nde sender
mls nde interface

ip flow-cache timeout active 1
mls flow ip interface-full
ip flow-export source Loopback0
ip flow-export version 5
ip flow-export destination x.x.x.x 2055


Rubens




On 1/15/06, Paul Stewart <pstewart at nexicomgroup.net> wrote:
> Sup2
>
> Thanks...
>
> -----Original Message-----
> From: Rubens Kuhl Jr. [mailto:rubensk at gmail.com]
> Sent: Sunday, January 15, 2006 10:51 AM
> To: Paul Stewart
> Subject: Re: [c-nsp] Netflow - 6509
>
> What's the supervisor, Sup1 or Sup2 ?
>
>
> Rubens
>
> On 1/15/06, Paul Stewart <pstewart at nexicomgroup.net> wrote:
> > Hi everyone...
> >
> > I'm trying to setup Netflow monitoring on a 6509 (MSFC2) but the data
> > being received at the netflow collector (ManageEngine NetFlow Analyzer
> > 5) is "sparse"... I'm trying to collect AS information to see which
> > AS's we talk to the most etc...  I've taken a peering router and setup
>
> > netflow on it (2811) and it works fine....
> >
> > Do I need a netflow card in the 6500?  Someone suggest that to me but
> > wanted to confirm if it's needed... We're running native IOS BTW...
> >
> > Thanks,
> >
> > Paul Stewart
> > IP Routing/Switching
> > Nexicom Inc.
> > http://www.nexicom.net/
> >
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>



More information about the cisco-nsp mailing list