[c-nsp] Router recommendation

[Dave Temkin]

I'd say the 2851 would serve you well.  You'd need to add an additional
ethernet port (either via HWIC or NM) but it would work fine.

Otherwise, to get 3 FE's onboard, you'd have to go with a 7200 with an
NPE-G1, which sounds overkill for this.



On Sun, 15 Jan 2006, Bob Tinkelman wrote:

> I'm interested in what routers folk would recommend
> (or are using) for the simplest of dual-homed customers:
>
> Customer is in a colo center with 2 upstreams, and so
> needs a router with 3 100baseT Ethernet ports, one to
> his equipment and one to each upstream.
>
> The router will do bgp with both upstreams, but will
> announce only a small number of nets and will accept
> default-routes only from the upstreams.
>
> Bandwidth is reasonably low --- say at most 10-20Mbps
> to each upstream.
>
> --
> Bob Tinkelman <bob at tink.com>
> ISPnet, Inc.    718.464.4747
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>