[c-nsp] CBWFQ with Tunnel interface

Oliver Boehmer (oboehmer) oboehmer at cisco.com
Fri Jan 20 09:39:29 EST 2006


Aly, Yasser <mailto:Yasser.Aly at getronics.com> wrote on Friday, January
20, 2006 2:24 PM:

> I wonder if I applied a service-policy on the Ethernet input direction
> to match on the traffic and set IP prec accordingly. Then, apply
> another 
> service-policy under the serial interface on the output direction
> matching on the IP prec and set bandwidth and priority commands
> accordingly would work? Putting into consideration that a tunnel is
> running over the serial interface and qos-preclassify command is
> applied under the tunnel interface

this would work as well.. then you would perform QoS on the
GRE-encapsulated packets on the physical interface. Then you also don't
need a hierarchical policy-map..

	oli



More information about the cisco-nsp mailing list