[c-nsp] bandwidth

[Stephen Kratzer]

You're probably using the default cbit plcp framing. Verify which framing 
method you're using (show controller atm ?/?/? | inc Framing mode:), and if 
that is the case, call Verizon and see if you can switch to cbit adm framing.

On Wednesday 25 January 2006 12:04, Alban Dani wrote:
> hello,
>
> A few months back we upgraded our pipe to teh internet through verizon from
> 40 to 45 Mbps.
> However during all this months all my traffic monitoring tools show me that
> we always peek at 40 and never go above it?
>
> I want to get back at verizon and tell them about it?
>
> I use Cricket, netflow analyzer and a packeshaper to get to this
> conclusion.
>
> Is there any Cisco command that I can run to figure out what my connection
> looks like?
>
> We get the link from Verizon through a Lighstream switch and that connects
> to a 7200 series router.
>
> Thanks,
>
> Alban
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/