[c-nsp] Backup radius server doesn't work.

[Prit Patel]

 HI,

 I m trying one group with 2 radius but problem i m facing that even if
first radius server is responding then also some query goes to second server
and instead of acting as failover it is acting as a load-balance mode.


Regards
Prit


On 7/1/06, Asbjorn Hojmark - Lists <lists at hojmark.org> wrote:
>
> > aaa group server radius rad_eap                       <----- primary
> >   server 192.168.232.254 auth-port 1645 acct-port 1646
> >
> > aaa group server radius rad_eap_local         <------local
> >   server 192.168.232.3 auth-port 1812 acct-port 1813
>
> You have two groups with one server each. I think you meant to
> do one group with two servers? If you do that, you can also use
> the dead timer mentioned by Oli.
>
> -A
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>