[c-nsp] 6500 - wrong fan tray?

[Tim Stevenson]

Yes, and then it will shut the system down (after ~5m).

Tim

At 04:03 PM 7/5/2006 +0100, Ed Butler uttered:
>We have a Sup720-3BXL here with a 6500 chassis and "normal" (rather than
>high speed) fan tray. When powered on, what should be the expected
>behaviour? Will the Sup720 give a friendly error message that the fan
>tray needs upgrading?
>
>Regards,
>
>Ed Butler
>RapidSwitch Ltd
>DDI: 020 7106 0731
>
>RapidSwitch Ltd, 5th Floor, Sovereign House, 227 Marsh Wall, London, E14
>9SD
>
>This email message is intended only for the addressee(s) and contains
>information that may be confidential and/or copyright.  If you are not
>the intended recipient please notify the sender by reply email and
>immediately delete this email. Use, disclosure or reproduction of this
>email by anyone other than the intended recipient(s) is strictly
>prohibited. No representation is made that this email or any attachments
>are free of viruses. Virus scanning is recommended and is the
>responsibility of the recipient.
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/



Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Catalyst 6500
Cisco Systems, http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.