[c-nsp] cisco-nsp Digest, Vol 44, Issue 14

[Asbjorn Hojmark - Lists]

> So if I understand correctly, the SUP32 is sufficient to 
> support the L3 features I require (OSPF, BGP, WCCP, VLANS,
> MQC), and then I also need to select a card such as WS-X6148-
> GE-TX  for the switch ports, which can also support an IP
> address on the port for L3 point to point links right ?

ACK.

(But you should use 6148A, as David commented).

> What makes the actual difference between a 7600 and a 6500, 
> since they both do L2 and L3 ?

The only technical difference the logo on the chassis and the
part numbers. The rest is marketing.

-A