[c-nsp] NPE400 12.2(28)SB breaking POS STM1

[Diego Castro]

Daniel

Can you try configuring the following command at the
Cisco interface:

 pos flag c2 2

--- Daniel Roesen <dr at cluenet.de> wrote:

> On Thu, Jun 22, 2006 at 05:34:53PM -0700, Diego
> Castro wrote:
> > Can you try with the last release in that train
> 12.2.28-SB2 ?
> 
> Doesn't work with SB2 either...
> 
> 
> Best regards,
> Daniel
> 
> -- 
> CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet --
> PGP: 0xA85C8AA0
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at
> http://puck.nether.net/pipermail/cisco-nsp/
>