[c-nsp] NPE400 12.2(28)SB breaking POS STM1

[Daniel Roesen]

On Sat, Jul 08, 2006 at 05:34:41AM -0700, Diego Castro wrote:
> Can you try configuring the following command at the
> Cisco interface:
> 
>  pos flag c2 2

Didn't work, and isn't expected to work as the Cisco is already
transmitting the correct value 22 (0x16)... otherwise the Juniper
would reject the link anyway...


Best regards,
Daniel

-- 
CLUE-RIPE -- Jabber: dr at cluenet.de -- dr at IRCnet -- PGP: 0xA85C8AA0