[c-nsp] Dropping ISDN dialup access

[Robert Blayzor]

Kanagaraj Krishna wrote:
>    We have an ISDN dialup customer who uses a ISDN modem on their side to 
> connect to our network. On our side its connected to a outdated Xyplex router. 
> Currently we are in the process of changing to a Cisco 7206 router with 8 port 
> BRI-S/T. The issue is that with the cisco, whenever the customer dials in the 
> call last for only 120seconds and drops. Any idea on solving this issue? 
> Thanks.


Two things you can try.  Try configuring the idle-timeout on the router
Dialer1 interface or have your RADIUS server (if using one) send the
appropriate attribute to disable or extend it.

as0(config-if)#dialer idle-timeout 1200 ?
  either   Reset idle timer based on both inbound and outbound traffic
  inbound  Reset idle timer based on inbound traffic only
  <cr>

as0(config-if)#dialer idle-timeout 1200



-- 
Robert Blayzor, BOFH
INOC, LLC
rblayzor\@(inoc.net|gmail.com)
PGP: 0x66F90BFC @ http://pgp.mit.edu
Key fingerprint = 6296 F715 038B 44C1 2720  292A 8580 500E 66F9 0BFC

Never trust a program unless you have the source.