[c-nsp] Cat 6500 and MPLS nat

[Nigel Camp]

Thanks for the info everyone.

Cheers,
Nigel 

-----Original Message-----
From: Ian Cox [mailto:icox at cisco.com] 
Sent: Wednesday, 12 July 2006 5:31 AM
To: Nigel Camp; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Cat 6500 and MPLS nat



Use a 7200 or a firewall services module to perform this function. 
NAT between MPLS VPNs is not supported on Sup720 3bXL.


Ian

At 11:40 AM 7/11/2006 +1000, Nigel Camp wrote:
>Hi all,
>
>Just a quick question on a Cat 6500 with a sup 720 3BXL.
>I'm looking at turning on the Network Address Translation (NAT) 
>Integration with MPLS VPNs feature, however it appears that it isn't 
>supported in the 6500's at all.
>I've checked feature navigator, but with no luck at all.
>
>The command im looking for basically allows the vrf keyword in the nat 
>list / route-map statement.
>
>If it isn't available at all at this stage, will it be in the near 
>future?
>
>Thanks for any info.
>
>Regards,
>Nigel
>Nigel Camp
>Senior Network Engineer
>Direct | 07 3234 9325 Mobile | 0402 456 499 Email | 
>Nigel.Camp at securetelecom.com.au
>
>
>SecureTelecom doubles in size with the acquisition of iExec. Click here

>to find out more.
>
>
>Sydney - Melbourne - Brisbane - Adelaide - Perth - Canberra
>
>Level 27 123 Eagle Street Brisbane QLD 4000 | Phone | 1300 887 042 | 
>Fax | 1300 887 047 | Web : http://www.securetelecom.com.au
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at http://puck.nether.net/pipermail/cisco-nsp/