[c-nsp] logging interface up/down events - not working?

[Jorge Evangelista]

You could check all interfaces in your router

# show interface | include (line protocol | Hardware )


On 7/10/06, matthew zeier <mrz at velvet.org> wrote:
>
>
> Asbjorn Hojmark - Lists wrote:
> >> Just deployed a couple 6500s with Sup32s and Sup720s running
> >> 12.2(18)SXF4 and 12.2(18)SXD7.
> >>
> >> In a prior life I ran a bunch of boxes with Sup2s and am used
> >> to see interface up/down events in syslog or even on 'term
> >> monitor'.  I don't see that on these boxes.
> >
> > Are you using the global command ('logging event link-status
> > default')? I had CSCsd78306 filed for that problem, and I see
> > that it still isn't fixed.
>
> I wasn't but I am now.  I forgot to realize that my past life Sup2s where
> running Hybrid and that was normal in IOS there, not so in native.
>
> Anyways, works as expected now.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
"The network is the computer"