[c-nsp] logging interface up/down events - not working?

[matthew zeier]

Jorge Evangelista wrote:
> You could check all interfaces in your router
> 
> # show interface | include (line protocol | Hardware )

I could but that's not going to get me what I was looking for.  I want 
messages like:

Jul 11 13:31:43.598 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface 
GigabitEthernet4/19, changed state to down

to show up in syslog or on the terminal (after 'term mon').

> 
> 
> On 7/10/06, matthew zeier <mrz at velvet.org> wrote:
>>
>> Asbjorn Hojmark - Lists wrote:
>>>> Just deployed a couple 6500s with Sup32s and Sup720s running
>>>> 12.2(18)SXF4 and 12.2(18)SXD7.
>>>>
>>>> In a prior life I ran a bunch of boxes with Sup2s and am used
>>>> to see interface up/down events in syslog or even on 'term
>>>> monitor'.  I don't see that on these boxes.
>>> Are you using the global command ('logging event link-status
>>> default')? I had CSCsd78306 filed for that problem, and I see
>>> that it still isn't fixed.
>> I wasn't but I am now.  I forgot to realize that my past life Sup2s where
>> running Hybrid and that was normal in IOS there, not so in native.
>>
>> Anyways, works as expected now.
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> 
>