[c-nsp] logging interface up/down events - not working?

[Jorge Evangelista]

Matthew

(config)# logging trap debugging
(config)# logging facility local5
(config)# logging source-interface loopback0
or
(config)# logging source-interface GigabitEthernet4/19
(config)# logging  IPSYSLOGSERVER


http://searchnetworking.techtarget.com/tip/1,289483,sid7_gci816003,00.html

On 7/12/06, matthew zeier <mrz at velvet.org> wrote:
>
>
> Jorge Evangelista wrote:
> > You could check all interfaces in your router
> >
> > # show interface | include (line protocol | Hardware )
>
> I could but that's not going to get me what I was looking for.  I want
> messages like:
>
> Jul 11 13:31:43.598 PDT: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> GigabitEthernet4/19, changed state to down
>
> to show up in syslog or on the terminal (after 'term mon').
>
> >
> >
> > On 7/10/06, matthew zeier <mrz at velvet.org> wrote:
> >>
> >> Asbjorn Hojmark - Lists wrote:
> >>>> Just deployed a couple 6500s with Sup32s and Sup720s running
> >>>> 12.2(18)SXF4 and 12.2(18)SXD7.
> >>>>
> >>>> In a prior life I ran a bunch of boxes with Sup2s and am used
> >>>> to see interface up/down events in syslog or even on 'term
> >>>> monitor'.  I don't see that on these boxes.
> >>> Are you using the global command ('logging event link-status
> >>> default')? I had CSCsd78306 filed for that problem, and I see
> >>> that it still isn't fixed.
> >> I wasn't but I am now.  I forgot to realize that my past life Sup2s where
> >> running Hybrid and that was normal in IOS there, not so in native.
> >>
> >> Anyways, works as expected now.
> >> _______________________________________________
> >> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>
> >
> >
>


-- 
"The network is the computer"