[c-nsp] Transporting TDM voice DS3s over Ethernet

[John Neiberger]

Look at www.overturenetworks.com. I think they may have something that does
what you require.

HTH,
John

On 7/14/06, Matthew Stainforth <Matthew.Stainforth at nucomm.net> wrote:
>
>
> I'm trying to find a way to transport two DS3s carrying all TDM voice
> traffic (if it matters) over an ethernet segment.
>
>
> Telco| ============= |IX building| ---------------------- |co-lo|
> ========== |PBX|
>
> Where ==== is two DS3 circuits and ------ is a 100meg ethernet vlan
>
> I can get DS3s from the carrier to the IX but the co-lo provider only
> does ethernet between the IX and their premises (I was assuming it was
> sonet...so my bad)
>
> My first thought was to use routers with DS3 cards and bridge the
> interfaces but it's not going to be that simple is it?
>
> Has anyone out there tried something like this and found a solution?
>
> Thanks...
>
> Matt...
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>