[c-nsp] Cisco 6500 Port-Channel Problem.

[Carl Kloppenborg]

Looks like one of the interfaces is running at 100mbs the other is
running 1gbs. I would hard code both to either 100 or 1000 and then try
and configure them again.

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Alex Cruz Farmer
Sent: Wednesday, July 19, 2006 10:52 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco 6500 Port-Channel Problem.

Hi,

I've just tried to bring up a Port-Channel between two 6500s (Us ->
Supplier), and received the 
following error:

Jul 19 18:16:55.829: %EC-SP-5-CANNOT_BUNDLE2: Gi5/8 is not compatible
with Gi5/4 and will be 
suspended (Bcast Supp. Level of Gi5/8 is 100, Gi5/4 is 10000 )

I thought this may have been to do with some storm-control settings, but
there isn't anything on the 
port which would affect it. Currently, the configuration is extremely
basic, and I'm still having no 
joy.

Building configuration...
!
interface GigabitEthernet5/4
  description 1 - July 06
  no ip address
  no cdp enable
  channel-group 50 mode active
!
interface GigabitEthernet5/8
  description 2 - July 06
  no ip address
  no cdp enable
  channel-group 50 mode active
!
interface Port-channel50
  ip address 192.168.0.2 255.255.255.252
end

It's running quite an old version of IOS, which could be the problem
(c6sup22-ps-mz.121-20.E.bin).

Any suggestions would be much appreciated. Could changing the
port-channel from routed to a 
switchport perhaps fix the issue?

Thanks in advance!

--
Alex Cruz Farmer
NetSumo Limited
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/