[c-nsp] cisco LX to HP

Marko Milivojevic markom at pangalactic.net
Fri Jul 21 12:49:04 EDT 2006


... which could mean that it's not at all up, but it just doesn't look for 
the other side to see if it's up or not. 3550's are wierd in this regard. 
have you tried swapping tx/rx fibers, with auto negotiation turned on?

Voll, Scott wrote:
> Yes.... that's how we got the cisco side up.
> 
> -----Original Message-----
> From: Marko Milivojevic [mailto:markom at PanGalactic.net] 
> Sent: Friday, July 21, 2006 9:06 AM
> To: Voll, Scott
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] cisco LX to HP
> 
> 
> Have you tried to play with speed and link negotiation settings?
> 
> Voll, Scott wrote:
>> I have a 3750 -12g layer 3 switch that I'm trying to connect to a HP
>> 4000 over a LX single mode.
>>
>>  
>>
>> The Cisco comes up and has link but the HP does not have link.  Has
>> anyone seen anything like this before?
>>
>>  
>>
>> The Cisco is running 12.2.25see1.
>>
>>  
>>
>> Thanks
>>
>>  
>>
>> Scott
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
> 


More information about the cisco-nsp mailing list