[c-nsp] OSPF Route Distribution

[John Smith]

Greetings, 
   
  I have a question on OSPF. I have the following setup. 
   
  ======================================
RouterA
!
interface Loopback0
ip address 192.168.1.1 255.255.255.255
!
interface FastEthernet0/0
ip address 10.10.10.2 255.255.255.0
ip ospf cost 100
speed 100
full-duplex
!
router ospf 100
network 10.10.10.2 0.0.0.0 area 2
network 192.168.1.1 0.0.0.0 area 2
!
======================================
RouterB
!
interface Loopback0
ip address 192.168.1.2 255.255.255.255
!
interface FastEthernet0/0
ip address 10.10.10.3 255.255.255.0
ip ospf cost 100
speed 100
full-duplex
!
router ospf 100
network 10.10.10.3 0.0.0.0 area 2
network 192.168.1.2 0.0.0.0 area 2
!
======================================
   
  Question - Do I have to add the following network statement to OSPF config to distribute 10.10.10.0/24? 
   
  network 10.10.10.0 0.255.255.255 area 2
   
  Or can I just get away with the above config?
   
  --
Thanks!
John S. 

 		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.
 __________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com