[c-nsp] Routing/Switching Redundancy - Pair 6509's

[Phil Bedard]

HSRP/VRRP/GLPB (I think that's the newest Cisco redundancy protocol) will
work.

Phil


On 6/12/06, Paul Stewart <paul at canseek.ca> wrote:
>
> Hi there...
>
> We have a pair of 6509's currently with Sup2/MSFC2 cards.  Right now, a
> bunch of
> VLAN's terminate (routing) on one shelf and the rest on another
> shelf.  I'd like
> to add all VLAN's to the trunk in between the switches and have the
> routing done
> primarily on one shelf but failover to the other.  In other words I'd like
> to
> setup the VLAN interface for layer3 on both switches for redundancy
> purposes.
> All routing is OSPF on both 6500's.....
>
> What can I use to do this?  Just looking for a pointer to the right
> options and
> I can take it from there..;)
>
> Paul
>
> --
> This e-mail was brought to you by CanSeek.CA - Canada's Complete Search
> Engine!
> http://www.canseek.ca/
>
>
> _______________________________________________
> cisco-nsp mailing list   cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>