[c-nsp] How to tell if a PIX is UR or FO

[Joseph Jackson]

It says the same message in 6.x

 -----Original Message-----
From: 	Jason Lixfeld [mailto:jason at lixfeld.ca]
Sent:	Sat Jun 17 16:02:08 2006
To:	Garry Glendown
Cc:	cisco-nsp at puck.nether.net
Subject:	Re: [c-nsp] How to tell if a PIX is UR or FO

On 17-Jun-06, at 8:56 AM, Garry Glendown wrote:

> Jason Lixfeld wrote:
>> Question is, how do you tell which box is the FO and which box is the
>> UR.  As far as I recall, the FO is just a UR with a different license
>> key, correct?  Can a show ver tell this?  Does anyone have an example
>> of what the output would look like on a UR vs a FO box?
>
> "show version" does what you need ...
>
> [..]
> This platform has a Failover Only-Active/Standby (FO) license.
> [..]
>
> (output is from a 7.x PIX, but should be pretty much the same for 6.x)

Neat, so it does show something...

Can anyone verify the output for 6.2(2)?  I'd like to be as close to  
100% sure before I get my customer to reconfigure the "secondary"  
PIX.  Last thing I'd want is to have it start to reboot every 24 hours.

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/