[c-nsp] 837 adsl pppoe questions

William willay at gmail.com
Mon Jun 19 06:38:40 EDT 2006


Hey Peter,

On 19/06/06, Peter Hicks <peter.hicks at poggs.co.uk> wrote:
> Hi Will
>
> On Mon, June 19, 2006 11:21, William said:
>
> > I've now been asked to set a device up for an ADSL line in Ireland,
> > they will be using PPPoE instead of PPPoA which is what I'm use to
> > catering for.
> >
> > Can anyone share with me a working PPPoE configuration? Obviously with
> > all the sensitive bits censored. I just cant see in my config where I
> > would start delcaring I'm going to use PPPoE!
>
> I had the same problem in France, but it's really quite straightforward
> (unless you have a non-technical manager in France, on the phone to you,
> whilst you're waiting at Gatwick Airport for an incoming flight and
> neither of you can hear the other!)
>
> Use the same config as an 837, but instead put "pppoe enable" and
> "pppoe-client dial-pool-number 1" on Ethernet1.  Set your static default
> route up to the Dialer, and configure it as per PPPoA.

Already had the static set to dialer1 which is handy, I always have
Ethernet0 as the internal GW for clients with a private address to
point their default gateway to. This might be trickier then I first
thought!

>
> Let me know if you'd like a full config - but the above should get you
> started.

If you can email one over, I've be in debt to you.

>
> Best wishes,
>
>
> Peter.
>
> --
> Peter Hicks | e: my.name at poggs.co.uk | g: 0xE7C839F4 | w: www.poggs.com
>
>   A: Because it destroys the flow of the conversation
>   Q: Why is top-posting bad?
>
>


More information about the cisco-nsp mailing list