[c-nsp] How to tell if an interface is Single mode or Multi mode

[Jared Mauch]

On Tue, Jun 20, 2006 at 10:58:33AM -0700, Carl Kloppenborg wrote:
> Is there a way to tell if the GBIC is single mode or multi mode from a
> remote location? It's a 6509 running IOS

Router# sh int capabilities 
GigabitEthernet2/1
  Dot1x:                 yes
  Model:                 WS-X6516-GBIC
  Type:                  1000BaseSX
Router# sh int t7/1 capabilities 
TenGigabitEthernet7/1
  Dot1x:                 yes
  Model:                 WS-X6xxx-10GE
  Type:                  No Connector
Router# sh int t7/3 cap
TenGigabitEthernet7/3
  Dot1x:                 yes
  Model:                 WS-X6xxx-10GE
  Type:                  10Gbase-LR
  Speed:                 10000





-- 
Jared Mauch  | pgp key available via finger from jared at puck.nether.net
clue++;      | http://puck.nether.net/~jared/  My statements are only mine.