[c-nsp] How to tell if an interface is Single mode or Multi mode

[David Freedman]

switch>sh int g1/1 | in media
   Full-duplex, 1000Mb/s, media type is SX

When it says "Unknown" then you are probably using an unsupported (which 
doesn't support querying properly) or buggy one. (allthough I have seen 
IOS do this with genuine cisco ones)

Dave.



Carl Kloppenborg wrote:
> Is there a way to tell if the GBIC is single mode or multi mode from a
> remote location? It's a 6509 running IOS
> 
>  
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>