[c-nsp] How to tell if an interface is Single mode or Multi mode

Suzan S. suzan_ccie at yahoo.com
Tue Jun 20 16:37:09 EDT 2006


On Show interface gigaethernet 1/1 you will see the GBIC type( LH,LX,ZX single) (SX multimode)
   
  Full-duplex, 1000Mb/s, media type is LH
  
 
  Suzan
  Jordan Telecom
  
Carl Kloppenborg <ckloppenborg at vitalstream.com> wrote:
  Is there a way to tell if the GBIC is single mode or multi mode from a
remote location? It's a 6509 running IOS



_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/


 		
---------------------------------
Yahoo! Messenger with Voice. Make PC-to-Phone Calls to the US (and 30+ countries) for 2¢/min or less.


More information about the cisco-nsp mailing list