[c-nsp] How to tell if an interface is Single mode or Multi mode

[Carl Kloppenborg]

thanks

 

________________________________

From: Suzan S. [mailto:suzan_ccie at yahoo.com] 
Sent: Tuesday, June 20, 2006 1:37 PM
To: Carl Kloppenborg; cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] How to tell if an interface is Single mode or Multi mode

 

On Show interface gigaethernet 1/1 you will see the GBIC type( LH,LX,ZX single) (SX multimode)

 

Full-duplex, 1000Mb/s, media type is LH


 

Suzan

Jordan Telecom


Carl Kloppenborg <ckloppenborg at vitalstream.com> wrote:

	Is there a way to tell if the GBIC is single mode or multi mode from a
	remote location? It's a 6509 running IOS
	
	
	
	_______________________________________________
	cisco-nsp mailing list cisco-nsp at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-nsp
	archive at http://puck.nether.net/pipermail/cisco-nsp/

 

  

________________________________

Yahoo! Messenger with Voice. Make PC-to-Phone Calls <http://us.rd.yahoo.com/mail_us/taglines/postman1/*http:/us.rd.yahoo.com/evt=39663/*http:/voice.yahoo.com>  to the US (and 30+ countries) for 2¢/min or less.