[c-nsp] c7206 ios for dsl aggregation

[Kristofer Sigurdsson]

Hi,

> vpdn-group 1
>  accept-dialin
>   protocol pppoe
>   virtual-template 1
>  pppoe limit per-mac 2
>  pppoe limit per-vc 2

You might want to check those limits.

debug pppoe errors while users are trying unsuccessfully to connect should
show you if you are hitting those.


> interface Virtual-Template1
>  mtu 1492
>  ip unnumbered Loopback0
>  no ip redirects
>  no ip unreachables
>  autodetect encapsulation ppp
>  peer default ip address pool pool-adsl
>  ppp authentication chap pap ms-chap
> !
> ip local pool pool-adsl 10.2.64.1 10.2.64.254 cache-size 0
> ip local pool pool-adsl 10.2.65.1 10.2.65.254
> ip local pool pool-adsl 10.2.66.1 10.2.66.254
> ip local pool pool-adsl 10.2.67.1 10.2.67.254
> ip local pool pool-adsl 10.2.68.1 10.2.68.254
> ip local pool pool-adsl 10.2.69.1 10.2.69.254
> ip local pool pool-adsl 10.2.70.1 10.2.70.254
> ip local pool pool-adsl 10.2.71.1 10.2.71.254
> ip local pool pool-adsl 10.2.72.1 10.2.72.254
> ip local pool pool-adsl 10.2.73.1 10.2.73.254
> ip local pool pool-adsl 10.2.74.1 10.2.74.254
> ip local pool pool-adsl 10.2.75.1 10.2.75.254
> ip local pool pool-adsl 10.2.76.1 10.2.76.254

How many users are typically connected when you experience those
problems?  Is it possible that the address pools are full?

-Kristo