[c-nsp] c7206 ios for dsl aggregation

[Alain Cocconi]

Kristofer Sigurdsson a écrit :
> Hi,
>
>> vpdn-group 1
>>  accept-dialin
>>   protocol pppoe
>>   virtual-template 1
>>  pppoe limit per-mac 2
>>  pppoe limit per-vc 2
>
> You might want to check those limits.
>
> debug pppoe errors while users are trying unsuccessfully to connect 
> should
> show you if you are hitting those.
>
no ppoe at all for the users with problems, no cells at all coming from 
those pvc
>
>> interface Virtual-Template1
>>  mtu 1492
>>  ip unnumbered Loopback0
>>  no ip redirects
>>  no ip unreachables
>>  autodetect encapsulation ppp
>>  peer default ip address pool pool-adsl
>>  ppp authentication chap pap ms-chap
>> !
>> ip local pool pool-adsl 10.2.64.1 10.2.64.254 cache-size 0
>> ip local pool pool-adsl 10.2.65.1 10.2.65.254
>> ip local pool pool-adsl 10.2.66.1 10.2.66.254
>> ip local pool pool-adsl 10.2.67.1 10.2.67.254
>> ip local pool pool-adsl 10.2.68.1 10.2.68.254
>> ip local pool pool-adsl 10.2.69.1 10.2.69.254
>> ip local pool pool-adsl 10.2.70.1 10.2.70.254
>> ip local pool pool-adsl 10.2.71.1 10.2.71.254
>> ip local pool pool-adsl 10.2.72.1 10.2.72.254
>> ip local pool pool-adsl 10.2.73.1 10.2.73.254
>> ip local pool pool-adsl 10.2.74.1 10.2.74.254
>> ip local pool pool-adsl 10.2.75.1 10.2.75.254
>> ip local pool pool-adsl 10.2.76.1 10.2.76.254
>
> How many users are typically connected when you experience those
> problems?  Is it possible that the address pools are full?
>
the pool is 50% used only

> -Kristo
>